Workshops and Training

Workshops, Seminars and Training custom made for your requirements. For Digital, LFP, Offset, Proofing, Fine art Reproduction, photo labs and Dye Sublimation. Learn how to get accurate color from image capture to print with Delta E (Color Difference) that you never thought possible to achieve. Learn about color Theory, Lab, LCh, Illuminants (A, D50, D65, Fluorescent), Color matching under different light conditions, Metamerism, Spectrophotometry, Densitometry, Black generation, Total area coverage (TAC), Learn the Strengths and limitations of each process. In essence everything you need to know to achieve perfect color reproduction.

 

1 DAY TRAININGS ONSITE:

  • ONYX Media Profiling 

We do Insitu service of Linearization, characterization and workflow configuration of your printers with the Onyx Rip.

 

  • Wasatch Media Profiling

We do Insitu service of Linearization, characterization and workflow configuration of your printers with the Wasatch Rip.

 

  • VersaWorks Media Profiling

We do Insitu service of Linearization, characterization and workflow configuration of your Roland printers with the Roland VersaWorks Rip.

 

  • EFI ColorProof Media Profiling

We do Insitu service of Linearization, characterization and workflow configuration of your printers with the EFI ColorProof Rip.

 

  • Colorburst Media Profiling

We do Insitu service of Linearization, characterization and workflow configuration of your printers with the ColorbBurst Rip.

 

  • SAI PhotoPtint Media Profiling

We do Insitu service of Linearization, characterization and workflow configuration of your printers with the SAI PhotoPrint Rip.

 

  • Caldera Media Profiling

We do Insitu service of Linearization, characterization and workflow configuration of your printers with the Caldera Rip.

 

  • Mimaki MPM & RasterLink Media Profiling

We do Insitu service of Linearization, characterization and workflow configuration of your printers with the Mimaki MPM & RasterLink Rip.

 

  • GMG ColorProof Media Profiling 

We do Insitu service of characterization and workflow configuration of your printers with the GMG ColorProof Rip.

 

  • Kodak Prinergy with Harmony Standarization

We do Insitu service of CTP or CTF Linearization, G7, 12647-2  or 12647-3 Standardization, Workflow configuration of the Kodak Prinergy with Harmony.

 

  • Agfa Apogee  Standarization

We do Insitu service of CTP or CTF Linearization, G7, 12647-2  or 12647-3 Standardization, Workflow configuration of the Agfa Apogee.

 

  • Fuji XMF Standarization

We do Insitu service of CTP or CTF Linearization, G7, 12647-2  or 12647-3 Standardization, Workflow configuration of the Fuji XMF.

 

  • Heidelberg Prinect  Standarization

We do Insitu service of CTP or CTF Linearization, G7, 12647-2  or 12647-3 Standardization, Workflow configuration of the Heidelberg Prinect.

 

  • Harlquin Rip  Standarization

We do Insitu service of CTP or CTF Linearization, G7, 12647-2  or 12647-3 Standardization, Workflow configuration of the Harlequin Rip.

 

  • Compose Harlquin Rip  Standarization

We do Insitu service of CTP or CTF Linearization, G7, 12647-2  or 12647-3 Standardization, Workflow configuration of the Compose Harlequin Rip.

 

  • Xitron Harlquin Rip  Standarization

We do Insitu service of CTP or CTF Linearization, G7, 12647-2  or 12647-3 Standardization, Workflow configuration of the Xitron Harlequin Rip.

 

  • Colormanagement Calibration From input to output per day.

We Calibrate and Characterize your entire Workflow from input to output. If your Rip can be linearized we can Calibrate it!!!

 

 

2 DAY TRAININGS ON SITE:

Introduction to Color Management  

This is a Theory introduction to The following topics:

Introduction to press side Color management.

Topics to be covered:

  • Introduction to spectrophotometric color measurement.

  • Additive & Subtractive Color

  • Color Viewing standards.

  • Standard Observer

  • Illuminant

  • Color Measurement

  • Colorimetry; Lab and Lch color space’s and spectral data.

  • Fluorescence and metamerism

  • Color management system.

  • Densitometry, colorimetry and spectrophotometry

  • ink and paper

  • Process color printing (CMYK)

  • Black Generation

  • Systems for Quality assurance, ICC profiling & ISO Standardization.

  • Originals and their reproduction.

  • Quality assurance for lithographic Plates.

  • Programs & tools for ICC profiling & color measurement

  • Color management, Calibration & Characterization consisting of:

  • Monitor Calibration

  • Scanners & Digital Cameras

  • Imagesetter Calibration, CTP Calibration

  • Plate Calibration

  • ICC profiling of RGB, CMYK & Hexachrome printers.

  • Press calibration & standardization according to ISO norms G7, 12647-2  or 12647-3

  • Calibration & ICC Profiling of color proofing systems.

  • Color management at RIP level.

 

 

3 DAYS TRAINING ON SITE:

  • G7 Training

We teach you how to Linearize your CTP or CTF, Measure Solid Primaries CMYK and Overprints RGB to determine Ideal Densities to match Colorimetric Lab values of the G7 norm and then generate Tone Response curves to adjust dot gain on press and finally finetune your dot gain curves to achive gray balance from Highlights to Shadows.

 

  • ISO Norm 12647-2 Training

We teach you how to Linearize your CTP or CTF, Measure Solid Primaries CMYK and Overprints RGB to determine Ideal Densities to match Colorimetric Lab values of the ISO 12647-2 norm and then generate Tone Response curves to adjust dot gain on press to match the norms dotgain for the substrate at hand.

 

  • ISO Norm 12647-3 Training (NewsPrint)

We teach you how to Linearize your CTP or CTF, Measure Solid Primaries CMYK and Overprints RGB to determine Ideal Densities to match Colorimetric Lab values of the ISO 12647-3 norm and then generate Tone Response curves to adjust dot gain on press to match the norms dotgain for Newsprint.

 

 

5 DAYS TRAINING ON SITE:

Day Integrated Color Management Workshop

This is a complete workshop where we include 2 days of theory and 3 days of Hands on practice

For a complete workflow from input to output covering the following topics:

Introduction to press side Color management.

Topics to be covered:

  • Introduction to spectrophotometric color measurement.

  • Additive & Subtractive Color

  • Color Viewing standards.

  • Standard Observer

  • Illuminant

  • Color Measurement

  • Colorimetry; Lab and Lch color space’s and spectral data.

  • Fluorescence and metamerism

  • Color management system.

  • Densitometry, colorimetry and spectrophotometry

  • ink and paper

  • Process color printing (CMYK)

  • Black Generation

  • Systems for Quality assurance, ICC profiling & ISO Standardization.

  • Originals and their reproduction.

  • Quality assurance for lithographic Plates.

  • Programs & tools for ICC profiling & color measurement

  • Color management, Calibration & Characterization consisting of:

  • -Monitor Calibration

  • Scanners & Digital Cameras

  • Imagesetter Calibration, CTP Calibration

  • Plate Calibration

  • ICC profiling of RGB, CMYK & Hexachrome printers.

  • Press calibration & standardization according to ISO norms G7, 12647-2  or 12647-3

  • Calibration & ICC Profiling of color proofing systems.

  • Color management at RIP level.

  • Test Prints

  • Testing ICC Profiles and calibrations.

  • Color management settings for Photoshop, CorelDraw, QuarkXpress, Indesign, AI.

 

It is important to know if the customer has color measurement equipment and color management software. Which brand of printers are they using, rips and version.

 

  • G7 Training

For Customers who have many presses; we teach you how to Linearize your CTP or CTF, Measure Solid Primaries CMYK and Overprints RGB to determine Ideal Densities to match Colorimetric Lab values of the G7 norm and then generate Tone Response curves to adjust dot gain on press and finally finetune your dot gain curves to achive gray balance from Highlights to Shadows.

 

  • ISO Norm 12647-2 Training

For Customers who have many presses; We teach you how to Linearize your CTP or CTF, Measure Solid Primaries CMYK and Overprints RGB to determine Ideal Densities to match Colorimetric Lab values of the 12647-2 norm and then generate Tone Response curves to adjust dot gain on press to match the norms dotgain for the substrate at hand.

 

  • ISO Norm 12647-2 & G7 Training

Here we put it all togheter so you can manage your Stadardization the way you prefer to go North American or European. In G7 we teach you how to Linearize your CTP or CTF, Measure Solid Primaries CMYK and Overprints RGB to determine Ideal Densities to match Colorimetric Lab values of the G7 norm and then generate Tone Response curves to adjust dot gain on press and finally finetune your dot gain curves to achive gray balance from Highlights to Shadows. In the ISO 12647-2 norm; we teach you how to Linearize your CTP or CTF, Measure Solid Primaries CMYK and Overprints RGB to determine Ideal Densities to match Colorimetric Lab values of the ISO 12647-2 norm and then generate Tone Response curves to adjust dot gain on press to match the norms dotgain for the substrate at hand.

 

  • ISO Norm 12647-3 Training (NewsPrint)                          

For customers who have more than one press or too many units to handle in 3 days; we teach you how to Linearize your CTP or CTF, Measure Solid Primaries CMYK and Overprints RGB to determine Ideal Densities to match Colorimetric Lab values of the ISO 12647-3 norm and then generate Tone Response curves to adjust dot gain on press to match the norms dotgain for Newsprint.

Copyright 2017 NUtec Digital Ink